 |
|
|
|
Kyoritsu 5010/5020 AC Current and AC Leakage Current Logger |
 |
 |
3 channel inputs for the simultaneous recording of
Leakage Current, Load Current and Voltage
- Power Quality analysis (only on KEW 5020) (Power
Quality:Reference voltage, Swell, Dip, Short power
Interruptions)
|
|
|
Large Capacity for storing 60,000 data points
- 60,000 data points can be recorded when 1ch is used,
and when all the three channels are used, 20,000 data
points per channel can be recorded
|
|
|
|
|
|
|
Lowpass Filter will filter out the in higher frequency
harmonics (Cutoff Frequency = Approx. 160Hz) |
|
|
LED flickers when the preset current / voltage value is
exceeded |
|
|
CALL: Confirmation of recorded data
- The following can be displayed: number of recorded
data points, (max+ min+ peak) value for each channel
complete with time/date information in the Normal
recording mode. (Detected values (i.e. when values are
outside preset limits ) can be displayed in other
recording modes)
- RECALL: The last 10 recorded data points including
time/date can be recalled on the logger display
|
|
|
Selection of One-time mode or Endless mode
- One-time on: Recording will stop when memory is used
up
- One-time off: Overwrite the old data, and store the
latest data
|
|
|
Non Volatile Memory
- Recorded data will be retained even if the batteries
are exhausted or replaced due to the presence of a
nonvolatile memory (guaranteed for 10 years)
|
|
|
Battery power indicator
- Indicates battery voltage in 4-levels (It is
possible to use the logger for a further approx. 24
hours even after the warming symbol is flashing)
|
|
|
The user friendly PC software "KEW LOG Soft 2" is
supplied
- Supplied with the user friendly software "KEW LOG
Soft 2". This permits editing, analysis and graphical
display of data.
- The recorded data is downloadable onto a PC via USB
cable.
- Variation of the measured voltage and current data
can be confirmed simultaneously on the PC display
monitor. (only on KEW 5020)
- Simplified Power Integration (The "KEW LOG Soft 2"
uses current and voltage recorded to calculate the
integral power consumption)
- Continuous measuring time: Approx. 10 days (Alkaline
Battery)
|
|
|
|
|
