Kyoritsu 5510 Digital Infrared Thermometer
Waterproof handheld Infrared Thermometer
Safe even if getting wet.
  • Dustproof and waterproof structure of IP67.
Possible to wash
Please feel secure to use the product on the spot, made from ABS resin of antibacterial specification.
Shock-proof structure: No damage even if dropped from the height of 1m.
With auto-power-off function, preventing consumption of the battery
Wide Temperature Range of -40ºC to 300ºC
Small and light: Possible to measure easily by one hand.
Portable type: Convenient to carry

Kyoritsu 5510 product photo

 

More Info
Kyoritsu 5510 Product Summary
Kyoritsu 5510 Product Literature
Repair and Calibration Service

 

 
Measurement Range -40ºC ~ 300ºC
Display Resolution  0.5ºC . 1ºC for below -20ºC and over 100ºC
Measuring Accuracy When the ambient temperature is 25 ±2ºC and the emissivity (ε) is 1,
0 ~ 300ºC: bigger value of either of ±1% of the
measured value ±1dgt or ±2ºC ±1dgt.
0 ~ -30ºC: |±3ºC ±1dgt
below -30ºC: |±5ºC ±1dgt
Repeatability within 1ºC ±1dgt
Response 1 sec(90% response)
Measuring Diameter (45mm/500mm(Optical sensitivity: 90%)
Collimation Before shipment: 0.95. The value can be altered between 0.8and 1.0 with the slide switch at the lower part of the battery compartment(by 0.05 steps).
Laser beam(650nm 1mW JIS class2)specifies the center.
Water-Proof Property IP67
Auto Power Off If no key is pressed for 30 seconds, the power is shut off automatically.
Shock Proof Property This instrument or its function/performance will not be damaged even if it is dropped on the p tile floor from 1 meter high.
Operating Temperature 0 ~ 50ºC
Operating Humidity 90% rH and below(no condensation)
Storage Temperature -20 ~ 55ºC(no condensation)(Note): In the case of longterm storage, the batteries should be removed.
Battery 2 AAA alkaline cell batteries
Battery Life Approximately 10 hours for continuous use
Housing material ABS(antibacterial)
Dimension 120 × 60 × 54mm(Maximum value for each direction)
Weight Approx. 123g
Accessories 2 AAA Alkaline Cell Batteries
Instruction Manual
Strap
Approved Standard CE marking:EMI EN61326 Class B, EMS EN61326 Annex C
Stability:±5ºC under EMC test environment at 25ºC

 

 
 
 
Copyright ©2012 Eaton
Industries Pty Ltd.
All rights reserved.